The release of RAD Studio 10.1 Berlin marks another step towards improving the overall product quality and the company process of managing customer reported issues.
Issues Fixed in Berlin
Let me focus on 10.1 Berlin first. As we stated publicly (see slide below), in this release the team fixed 744 customer reported issues. The total number of internal issues fixed is more than 2,500 (which includes those 744), as most issues are reported internally.
This is 30% to 50% higher than recent releases, as Malcolm pointed out in his blog. Notice that these 744 are either bugs fixed or that don't reproduce, likely due to some other fix. The count doesn't include duplicates (issues reported by more than one person) or reports we decided not to fix because they are as expected, considered documentation issues, or other cases. With those, the overall number would be over a thousand.
April Hot-fixes to the Rescue
Despite the effort for fixing bugs, some new issues slipped in the release. In particular there were a couple of rather significant regressions for which we have already released two hot fixes:
- 'April 2016 RAD Studio 10.1 Berlin Hotfix for DataSnap' at http://cc.embarcadero.com/item/30530
- 'April 2016 RAD Studio 10.1 Berlin Hotfix for Samsung Galaxy' at http://cc.embarcadero.com/item/30531
Bugs Status and Quality Portal
Having said this, it is worth trying to make some assessment about the status of bugs, and particularly publicly reported bugs and feature requests. While not everything has been synchronized between the internal and the public system, most of the information should be updated now. Looking to Quality Portal issues reported as bugs, there are 4,595 entries of which 67% are either closed or resolved. This is good progress. Feature requests are mostly open, as they started coming in a few months back, when plans for 10.1 Berlin had already been done.
Given the project page for RAD Studio on the Quality Portal hasn't got a real picture of the quality status, I've been creating an alternative page, currently at https://quality.embarcadero.com/secure/Dashboard.jspa?selectPageId=13100 (viewing the page requires you to login to the system). A snapshot of the current status is below. The plan is to add similar widgets to the main project page.
Automatic Installation
Warning
Speeding up the installation
Select only the platforms you want
Tip
Disable Debug DCUs if not needed
Tip
Check your Antivirus
Manual Installation
Step by step manual installation
- The first step is to get the sources. To get them, run the Setup.exe and unselect everything in the 'Select Additional Tasks' screen:The setup is designed so when everything is unselected in that screen, it will just uncompress the source code and the packages and do very little more. Some registry keys will be created for uninstallation, but besides that, it should do nothing but unpack the sources.
- Modify the Windows Path. You need to add the folder:Lineage 2 da Vinci. Lineage 2 da Vinci is a free to play private server. It offers Max Enhancement to 65k with 99%. L2 da Vinci is a project which was founded on 15th of January 2016.rnThe idea was to create a simple low rate server with a special enchanting system.rnThis server is dedicated to everyone who dreamed of high enchanted weapons to be independent of others.rnTherefore you can enchant items to 65535. Server Description / Features. L2 da Vinci is a project which was founded on 15th of January 2016.rnThe idea was to create a simple low rate server with a special enchanting system.rnThis server is dedicated to everyone who dreamed of high enchanted weapons to be independent of others.rnTherefore you can enchant items to 65535. Da vinci trento. .getreward Vote System: l2top.co facebook. Jul 12, 2018 Topic: L2j-Hi5 L2 DaVinci server 19:00 GMT+2 (unlimited enchant system).
<place where you installed FlexCel>TMSSoftwareFlexCelVCLNTPackages<dVersion>bplWin32
to the Windows path.You need to replace <dVersion> above by the actual folder for your Delphi version. (like for example dXE7 or dTokyo) - Edit the library path: Open Delphi and go to Main Menu->Tools->Options, then select Environment Options->Delphi Options->Library in the treeview at the left:Press the '..' button at the right in 'library path', and add the path:
<place where you installed FlexCel>TMSSoftwareFlexCelVCLNTPackages<dVersion>Win32Release
to the library path. Note that Delphi might complain that the path doesn't exist yet (we are going to create it in the next step). Just ignore the warning. - In Delphi, open the project group:
<place where you installed FlexCel>TMSSoftwareFlexCelVCLNTPackages<dVersion>FlexCel.groupproj
- Make sure all the packages are in Release mode:
- Right click all the packages in order (from first to last) and select 'install' for each one of them.
Advanced manual installing
- In the steps above, we built the packages only for Win32 and only for Release mode. You might also want to install other platforms, and install debug dcus.
- Debug dcus are explained in more detail in the section Disable Debug DCUs if not needed. If you want to install the debug dcus, you should repeat steps 5 and 6 of the step-by-step guide, but selecting now 'Debug' instead of 'Release' on step 5.
- To install other platforms, press the button at the right of the button in the screenshot of step 5, select the platform and repeat step 6. You might again repeat step 6 with debug configurations and release configurations.
- In step 2 we added an entry to the Windows Path. This is not strictly necessary, the only thing that isnecessary is that FlexCel .bpl files are reachable from Windows. The setup doesn't modify the Path,because the Windows Path can't be too big. Instead it creates symbolic links from the bpls to Delphi'sbpl folder (which is already in the Path). You could create symbolic links too in the same way insteadof modifying the Windows path. But the simplest solution is just to add the folder with FlexCel bpls to the Path.
- While in step 3 of the step-by-step section we only modified the library path, there are other paths that you can modify too, and which are set up when you install with the automatic setup.The paths that you can modify are:
- Library Path: Write the path to the FlexCel .dcu files here.
- Browsing Path: This is the place where you put the folders that contain all .pas files in FlexCel. Setting a Browsing path will allow you to ctrl-click into FlexCel identifiers and navigate to their definitions, and also to F7 into FlexCel symbols when using debug dcus.
- Debug Path: This path is similar to the library path, but it is used when you select 'Use debug .dcus' in your project options (see Disable Debug DCUs if not needed).Put the path for the dcus compiled in debug mode in this entry.
Note
Download Crack Do Delphi Berlin Path 3
Warning
Troubleshooting
Note
Tip
Tip
FlexCel didn't report any errors while installing, but I can't find the components in the component palette.
Note
E2202: Required package 'rtl' not found
- Open Delphi and go to Main Menu->Tools->Options, then select Environment Options->Delphi Options->Library in the treeview at the left:
- Choose the platform where you got the error from the combobox. In the image above we choose Win32, but if you had the error when installing in a different platform, make sure to select the correct one.
- Press the 'ellipsis' button at the right of the Library Path edit box as shown in the image above.
- Make sure that the first paths in your library are:
- For Win32:
- $(BDSLIB)$(Platform)release
- $(BDSUSERDIR)Imports
- $(BDS)Imports
- $(BDSCOMMONDIR)Dcp
- $(BDS)includeas in the image below:
- For Win64 or macOS:
- $(BDSLIB)$(Platform)release
- $(BDSUSERDIR)Imports
- $(BDS)Imports
- $(BDSCOMMONDIR)Dcp$(Platform)
- $(BDS)include
- For Android, iOS Device or iOS Simulator:
- $(BDSLIB)$(PLATFORM)Release
- For Linux64:
- $(BDSLIB)$(Platform)release
- $(BDSUSERDIR)Imports
- $(BDS)Imports
- $(BDSCOMMONDIR)Dcp$(Platform)
- $(BDS)include
- $(BDS)redist$(Platform)
- $(BDSCOMMONDIR)Bpl$(Platform)
- For Win32:
Important
$(BDSLIB)$(Platform)release
is grayed out, but this is a vital path to be able to compile from the command line (and find the 'rtl' package)E2225 Never-build package 'FlexCel_Core' must be recompiled
Tip
Note
MSB6003: The specified task executable 'dcc' could not be run
c:my componentsthirdparty..whatever
try installing them to something like c:dev
.Note
Important
E2202 Required package 'fmx' not found
CreateProcess failed; code 2
This version of the product does not support command line compiling.
- For installing in Delphi Starter, we have a special registered setup which comes precompiled so it doesn't require a command line compiler. You can get it from the registered users' download page, below the normal setup:
- For installing in a Delphi Trial you could use the precompiled setup as in point 1. But the precompiled setup comes with only Win32 targets (being designed for Delphi Starter and to avoid making it too big)So if you need to try other platforms, you could try installing the FlexCel Trial from our site. Even if it is a trial version, it will still allow you to evaluate Delphi with FlexCel. When you install the registered version of Delphi, you can install the registered version of FlexCel.
Tip
- The last option is to try a manual install
MSB4040: There is no target in the project.
Linux: ld-linux.exe: error: cannot find -lz
Linux: ld-linux.exe: error: cannot find -lgcc_s or cannot find -lstdc++
Link Crack
SouceCode By :elseif
https://github.com/elseif/Rad-Studio-Keygen/releases
Mod by: Delphi Fan. Ver: 1.2016.1116.15
Download Crack Do Delphi Berlin Path 1
Thanks to: unis elseif x-force cjack etc..
How to Use:
1. Download iso image file:
http://altd.embarcadero.com/download/radstudio/10.1/radstudio10_1_upd2_esd.iso
MD5: 920F0ACF67122BB04ED55EDD7A1C7579
Version: 24.0.25048.9432
2. Mount *.iso image and run intstallation process, select language,
Set Checkbox that you agree with License agreement, click 'Next >'
Now you are on the 'Input License' page..
3. Click '< Back' button
Now use keygen..
4. Click 'Generate Serial Number' to get new Serial Number.
!!! Do not use any other serial numbers from internet !!!
5. Click 'Generate Activation File'.
6. now click 'Next >' in the Setup page and continue installation process..
7. When Installation has finished, click 'Patch'.
8. For the FIRST RUN start RAD Studio as Administrator. <<< VERY IMPORTANT
(Maybe)!!!!!!!!!!!
Enjoy!!!
If you want install more than one RAD Studio Please Find cglm.ini from installed bin dir.
and change the slip file to your custom dir.
If you like,please Buy It!
https://www.embarcadero.com/app-development-tools-store/rad-studio